Commercial cleaning and facility maintenance for Massachusetts, Connecticut, and Rhode IslandMon to Fri 6:00 AM to 9:00 PM · Sat 8:00 AM to 12:00 PM · modular@cleanwith.us
I-495 carries our crews south from Marlborough, and Route 16 or Route 146 finishes the trip into Uxbridge in roughly 40 minutes.
Book a free walkthrough and we will look at every floor type in the building. You get an itemized proposal within two days, with no long-term contract attached.
What Our Clients Are Saying
Read all reviews by clicking on the button below, or use it to leave an honest review about our services
Uxbridge grew up around woolen mills on the Blackstone River, and today many of those brick buildings hold offices, light manufacturers, and mixed-use space. That history leaves a particular kind of floor behind: long VCT corridors, tile entries, and plant floors that take a beating. Modular Concepts builds its Uxbridge service around those surfaces, with scrubbing, burnishing, and strip and wax cycles set to the traffic each area sees.
Modular is a family-owned company operating since 2008, and floor care is where its crews spend much of their time. The team refinishes more than 150,000 square feet of VCT and terrazzo every year. That work covers hard surfaces only: VCT, tile, epoxy, and terrazzo. Wood refinishing and concrete polishing are not part of the service.
Crews reach Uxbridge from the Marlborough office in about 40 minutes, taking I-495 south and finishing on Route 16 or Route 146 into the Blackstone Valley. Daily janitorial work, restrooms, and office cleaning ride along with the floor program. One crew handles the whole building, so you are not juggling three vendors for one address.
Uxbridge grew up around woolen mills on the Blackstone River, and today many of those brick buildings hold offices, light manufacturers, and mixed-use space. That history leaves a particular kind of floor behind: long VCT corridors, tile entries, and plant floors that take a beating. Modular Concepts builds its Uxbridge service around those surfaces, with scrubbing, burnishing, and strip and wax cycles set to the traffic each area sees.
Modular is a family-owned company operating since 2008, and floor care is where its crews spend much of their time. The team refinishes more than 150,000 square feet of VCT and terrazzo every year. That work covers hard surfaces only: VCT, tile, epoxy, and terrazzo. Wood refinishing and concrete polishing are not part of the service.
Crews reach Uxbridge from the Marlborough office in about 40 minutes, taking I-495 south and finishing on Route 16 or Route 146 into the Blackstone Valley. Daily janitorial work, restrooms, and office cleaning ride along with the floor program. One crew handles the whole building, so you are not juggling three vendors for one address.
Floor work leads the Uxbridge service list. Commercial floor care keeps VCT, tile, epoxy, and terrazzo on a regular scrub and burnish schedule. Strip and wax restores worn corridors, and tile and grout cleaning handles lobbies and restrooms. Janitorial services and office cleaning cover the daily work between floor cycles. Warehouse cleaning fits manufacturers along Route 146, and any other Modular service can join the scope after the walkthrough.
Uxbridge sits in the Blackstone Valley in southern Worcester County, close to the Rhode Island line. Routes 146, 122, and 16 all pass through town. The Blackstone River shaped the place. Water power drove the woolen mills that once made Uxbridge a textile town, and the Blackstone River and Canal Heritage State Park now protects much of that riverfront. Many of the old mill buildings have been reworked into mixed-use space with offices, light industry, and small businesses under one roof. Manufacturers and professional offices fill out the rest of the commercial base, along with the offices around the town center.
For cleaning, that mix comes down to floors. Mill conversions often have long corridors and stairwells where foot traffic wears a gray path into the finish. Office lobbies in tile or terrazzo lose their shine under winter salt and sand. Manufacturing floors coated in epoxy collect oil, dust, and tire marks from carts and lifts. Each surface needs its own cycle. VCT holds up best with regular scrubbing, burnishing, and a full strip and wax when the finish wears through. Tile needs grout attention, and epoxy needs degreasing without harsh abrasion. Daily janitorial work keeps the rest of the building in order between those cycles.
A floor program only works if the people running it know the building. Modular keeps one crew on each site, so they learn which corridors wear first and which lobby needs attention after a storm. Terms run month to month under a written scope, which means the work has to earn each renewal. A quality record documents every visit, and supervisors check the results in person. When a floor needs more than routine care, the proposal says so before any work begins.
Questions go to a decision maker who can answer them, not to a call center. Charges appear in the scope before they appear on an invoice. Modular serves buildings across Massachusetts, Connecticut, and Rhode Island, and Uxbridge sits close to the Rhode Island line. Read the company background on the About Modular Concepts page, see what building managers say on the reviews page, or call (508) 658-0303 to set up a walkthrough.
Start with a free walkthrough at your Uxbridge site. A Modular lead walks every corridor, lobby, restroom, and production area with you. We note each floor type, the finish condition, where traffic wears lanes into the surface, and when the building sits empty. Those notes decide whether an area needs nightly scrubbing, a burnish cycle, or a full strip and wax.
Expect an itemized proposal in your inbox no more than 48 hours after the walkthrough. It breaks the building into areas and lists the daily tasks for each one. Floor work gets its own lines: how often crews scrub, when they burnish, and which months the strip and wax cycles fall in. Nothing on it locks you in past the current month.
After you sign off, a dedicated crew takes over your building and stays with it. Each person has cleared a background screening and carries full insurance coverage. Before the first night, the crew lead records alarm codes, door access, and any areas with wet processes or forklift traffic. Floor machines, pads, and finishes are matched to your surfaces before anyone starts.
Crews work the scope on the schedule you chose, whether nightly, weekly, or on weekends when floors have time to dry. Each visit ends with a quality record you can read any time. Supervisors stop in to inspect, and they look hard at the floors: shine, scuffs, and buildup along the edges. Anything they flag gets corrected on the next visit.
Every quarter we sit down with you and compare the scope against how the building is actually used. A winter of salt and sand may call for an extra scrub cycle. A quiet summer is the right time to strip and refinish a corridor. Changes go into the written scope with a phone call, not a new contract.
Pick a day, and a Modular lead will walk your Uxbridge building with you at no cost. We look at every floor, from the lobby tile to the plant epoxy, and tell you what each one needs. The drive from Marlborough takes about 40 minutes.
Call (508) 658-0303 or send the online request form. Your terms stay month to month, and you can end service whenever you choose. Commitment at your service.
About 40 minutes from the Marlborough office, using I-495 and then Route 16 or Route 146. Scheduled visits are planned around that drive, so they start on time. For an urgent problem, reach the office during business hours and a manager makes the dispatch call right away. The company does not staff an overnight emergency line.
Every Uxbridge quote is built from the walkthrough, so the number reflects your building. Square footage, how often crews visit, and the floor program all move it. A strip and wax cycle twice a year prices differently than monthly burnishing. The itemized proposal shows each line, so you can compare it with what you pay today.
Buildings with a lot of hard floor and a lot of foot traffic. That includes former mill buildings with long VCT corridors, office lobbies finished in tile or terrazzo, and manufacturing floors coated in epoxy. Crews scrub, burnish, and strip and wax on a set cycle. Floor care covers hard surfaces only, so wood refinishing and concrete polishing are not offered.
The same small group returns to your building every visit, and they work for Modular Concepts, a family-owned company operating since 2008. The wider team numbers about 100 professionals. Each person passes a background screening before starting and is fully insured. A supervisor inspects on a rotation, and a decision maker picks up when you call.
It can. Modular holds a license for kitchen hood cleaning and takes on every type of commercial kitchen, restaurants included, along with cafeterias and institutional kitchens. Crews degrease the hood, filters, ductwork, and exhaust fan. The job stops at the kitchen door, so dining rooms and the front of house stay outside the scope.
Converted mills are a good fit for the program. Their long hallways and shared lobbies often run on VCT or tile that sees heavy daily traffic. Crews schedule the loud machine work, like scrubbing and burnishing, after tenants leave. In multi-tenant buildings, common areas and individual suites can run on separate lines of one written scope.
The walkthrough sets it. A typical scope pairs routine janitorial work, such as trash, restrooms, dusting, and vacuuming, with a floor calendar for scrubbing, burnishing, and strip and wax. Some add carpet cleaning, tile and grout work, or routine high-touch disinfection with EPA-registered products. Every task and its frequency is written down before you approve.
Tell us about your facility. A team member responds within 24 hours to schedule your free walkthrough.
No obligation. We never share your details.
